There have been a few renditions of a FloatingX for M1A1, but non of them looked like they belonged in the actual game of Marathon.
This version matches the interface of the real game, and has the same floaty goodness of FloatingX.
The screenshots are actually from Legend, and the version i captured is slightly out of date, so there may be some very very minor differences.
Finally, The Health and Oxygen bars are misaligned by one pixel... Because of this small margin, I cannot correct it. And yes, I have tried.
Released
Once again building off Hopper's Marathon Classic HUD, the Trojan HUDs Pack both brings the classic Trojan interface to M1A1 (Trojan HUD with M1 weapon graphics, colored radar blips), and provides the full vanilla Trojan interface in preparation for the eventual coming of M1 support. (Eventually. Though it currently works well with the Trojan Legacy Sampler!)
Who says Trojan is dead?
Initial Release
This mod restores the original fonts used in the Macintosh version of Marathon.
NOTE: This only works with the DEFAULT HUD, custom HUDs have been reported to have issues with this plugin, so experiment at your own risk.
v1.0 - Initial Release
Are you working on a Lua HUD, and want to know how to draw inventory panels or weapons just like the built-in one? This plugin acts just like the hardcoded HUD from M2 and Infinity, so you can see how to duplicate any feature in Lua. It works with third-party scenarios too.
Version 1.1 fixes errors with the network radar, and hides ammo for a second weapon when you only have one.
This is a basic fullscreen HUD for any scenario that uses the default Marathon 2 or Infinity HUD, and doesn't come with its own HUD. It attempts to make as few assumptions as possible, which allows it to work on a wide variety of scenarios, but is a little ugly. See the screenshots for details.
Software mode works but is even uglier due to the inability to circle clip the motion sensor.
The only supported HUD size in this version is Normal.
Based on the Default HUD script by Hopper.
To install, create a Plugins directory next to the Scripts directory in the scenario you want to add it to, and copy this zip file to the Plugins directory.
Changes:
This is a version of the Fullscreen Corner HUD that is made to work with Trojan in Aleph One. It moves the HUD to the lower left corner of the screen and allows for fullscreen mode without any black bar.
The HUD graphics are from the M2 port of Trojan, which doesn't take up the full screen like the original does.
Removed the alternative shapes file since the gap happens even without my fullscreen plugin.
This is a slightly modified version of Hopper's M1A1 HUD. It moves the HUD to the lower left corner of the screen and allows for fullscreen mode without any black bar. This should work for any Aleph One scenario, including M1.
I also made a few small edits to the HUD itself for aesthetics and transparency.
Thanks to wrkncacnter for the additional scripting.
Exactly like Hopper's Marathon Classic HUD, except the full version HUD graphics are replaced with those found in the Marathon Demo v0.0.
For players who want to go truly retro. Enjoy!
1.0 Initial Release
1.1 [Reverted] The main HUD image I pasted from Rezilla wasn't color-accurate. Corrected.
I should stop trying to fix things. It looked terrible in-game. Reverted. :\
This is the classic Marathon 1 HUD, but modified to take the edge off just a little bit by extending it to fill modern 16:9 displays. For best results use 'Largest' HUD size in options.
With the extra space, an additional inventory page is displayed. In solo games, the extra page shows Ammunition at all times. In netgames, the extra page shows the Scoreboard at all times.
Based on the Classic M1 HUD plugin posted here by Hopper.
Wide Marathon 2 & Marathon Infinity HUD here.
1.1 - Add extra inventory page to fill extra space (Ammo in solo, scoreboard in netgame)
1.0 - Initial release
This is a collection of small single-purpose Lua scripts.
Feel free to include them in your own works or use them any way your like.
Marathon's media 'flows' from high elevations to low dynamically. Please see the included 'Water Buckets.sceA' map as an example. [Punch the switches]
Minimal HUD design around the crosshair.
Press the Microphone key (default: ~) to 'taunt' with assimilated BOB chatter. This attracts the focus of nearby active enemies (and allies).
Projectiles fired into a teleporter will be transported to the other side.
Enemies within the center crosshair will take crushing damage.
1.0 Initial Release
This plugin is a port of the Durandal XBLA interface to Aleph One. Compatible with Marathon 2 and Infinity, and included in the all-in-one downloads of those games.
Added support for Visual Mode.lua. This version was included with all-in-one downloads of Aleph One 1.1.
This is a slightly modified version of Hopper's M2 Default HUD. It moves the HUD to the lower left corner of the screen and allows for fullscreen mode without any black bar. This works for any non-M1 scenario.
Thanks to wrkncacnter for the additional scripting.
This is a basic fullscreen HUD for the original Classic Marathon. It also works with TROJAN. It is very minimalist, see the screenshots for details.
Software mode works but the square motion sensor will not be clipped out.
All three HUD sizes are supported, although the largest size is probably too large to use.
To install, copy this into the Plugins directory in your Classic Marathon install.
Initial release
This mod restores the original fonts used in the Macintosh version of Marathon.
NOTE: This only works with the DEFAULT HUD, custom HUDs have been reported to have issues with this plugin, so experiment at your own risk.
v1.0 - Initial Release
The perfect HUD for those of you who like to stare at balls while you play.
This is a slightly modified version of the Default HUD created by Hopper: https://simplici7y.com/items/m2-default-hud/
This is meant for people that want the HUD to be small, but not obscure parts of the game world. If you are bothered by the black bar this usually leaves, it can be filled in with artwork. I've included several options for artwork in the resources/extra_images folder. Or you can create your own.
To size the HUD, you can use the typical HUD sizes in the options. However, they will all be smaller than the default HUD, as one of the goals of this plugin is to maximize the game world view.
The normal HUD also typically leaves black bars on the sides depending on your resolution and settings, and this HUD attempts to eliminate that from happening.
If you downloaded a PepperHUD that was floating around from a long time ago, you should get this new version.
This is the default HUD for Marathon 2 & Marathon Infinity, extended to fill today's modern 16:9 screens when using "largest" HUD size mode. This plugin can be used with both Marathon 2 & Infinity.
A second inventory page is displayed to fill the new space. In Solo games, the extra page always shows Ammunition. In Netgames, the extra page always shows the Scoreboard.
Additionally, the 3D game view is no longer letterboxed.
Normal, Double, and Largest HUD sizes are all supported.
Lastly, this also fixes a couple small issues the original HUD had:
SMG/Fusion pistol item & ammo names are no longer cut off since now we have a bit more horizontal space
Yellow/Purple shield bars now don't have gray corners when overlapping the bar under it
Motion tracker graphic not as dithered as before, so it stands out less compared to the regular background
Note that due to custom graphics this is not compatible with custom scenarios that replace the HUD.
Based on the "M2 Default HUD" Lua by Hopper
This will not work with M1. I may later make a wide adaptation of the M1A1 HUD for those who want this kind of HUD in M1. Widescreen Marathon 1 Classic HUD here.
v1.1: Fixed shield/oxygen bars being drawn a tiny bit too low
v1.0: Initial release